# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
#
# This file contains the configuration for the LCDd server.
# 
# The format is ini-file-like. It is divided into sections that start at
# markers that look like [section]. Comments are all line-based comments,
# and are lines that start with '#' or ';'.
#
# The server has a 'central' section named [server]. For the menu there is
# a section called [menu]. Further each driver has a section which
# defines how the driver acts.
#
# The drivers are activated by specifiying them in a driver= line in the
# server section, like:
#
#   Driver=curses
#
# This tells LCDd to use the curses driver.
# The first driver that is loaded and is capable of output defines the
# size of the display. The default driver to use is curses.
# If the driver is specified using the -d <driver> command line option,
# the Driver= options in the config file are ignored.
#
# The drivers read their own options from the respective sections.



## Server section with all kinds of settings for the LCDd server ##
[server]

# Tells the server to load the given drivers. Multiple lines can be given.
# The name of the driver is case sensitive and determines the section
# where to look for further configuration options of the specific driver
# as well as the name of the dynamic driver module to load at runtime.
# The latter one can be changed by giving af File= directive in the
# driver specific section.
#
# The following drivers are supported:
#   bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, ea65, 
#   EyeboxOne, g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior,
#   irman, joy, lb216, lcdm001, lcterm, lirc, MD8800, ms6931, mtc_s16209x,
#   MtxOrb, NoritakeVFD, picolcd, pyramid, sed1330, sed1520, serialPOS,
#   serialVFD, sli, stv5730, svga, t6963, text, tyan, ula200, xosd
Driver=hd44780

# Tells the driver to bind to the given interface
Bind=127.0.0.1

# Listen on this specified port; defaults to 13666.
Port=13666

# Sets the reporting level; defaults to 2 (warnings and errors only).
#ReportLevel=3

# Should we report to syslog instead of stderr ? Default: no
#ReportToSyslog=yes

# Sets the default time in seconds to displays a screen.
WaitTime=5

# User to run as.  LCDd will drop its root priviledges,
# if any, and run as this user instead.
User=nobody

# If yes, the the serverscreen will be rotated as a usual info screen. If no,
# it will be a background screen, only visible when no other screens are
# active.
#ServerScreen=no

# The server will stay in the foreground if set to true.
#Foreground=no

# Where can we find the driver modules ?
# IMPORTANT: Make sure to change this setting to reflect your
#            specific setup! Otherwise LCDd won't be able to find
#            the driver modules and will thus not be able to
#            function properly.
# NOTE: Always place a slash as last character !
DriverPath=/usr/lib/lcdproc/

# GoodBye message: each entry represents a display line; default: builtin
#GoodBye="Thanks for using"
#GoodBye="   LCDproc!"

# The "...Key=" lines define what the server does with keypresses that
# don't go to any client.
# These are the defaults:
ToggleRotateKey=Enter
PrevScreenKey=Left
NextScreenKey=Right
#ScrollUpKey=Up
#ScrollDownKey=Down

# If you have only 4 keys, you can choose to use this:
#ToggleRotateKey=Enter
#PrevScreenKey=Up
#NextScreenKey=Down

# If you have only 3 keys, you can choose to use this:
#ToggleRotateKey=Enter
#PrevScreenKey=Up



## The menu section. The menu is an internal LCDproc client. ##
[menu]
# You can configure what keys the menu should use. Note that the MenuKey
# will be reserved exclusively, the others work in shared mode.

# The following works excellent with 4 keys or more.
MenuKey=Escape
EnterKey=Enter
UpKey=Up
DownKey=Down
# If you have 6 keys you may define these as well
#LeftKey=Left
#RightKey=Right

# If you have only 3 keys, you could use something like this:
#MenuKey=Escape
#EnterKey=Enter
#DownKey=Down



### Driver sections are below this line, in alphabetical order  ###


## EMAC BayRAD driver ##
[bayrad]

# Select the output device to use [default: /dev/lcd]
Device=/dev/lcd

# Set the communication speed [default: 9600; legal:  1200, 2400, 9600, 19200]
Speed=9600



## CrystalFontz driver (for CF632 & CF634) ##
[CFontz]

# Select the output device to use [default: /dev/lcd]
Device=/dev/ttyS0
# Select the LCD size [default: 20x4]
Size=20x4
# Set the initial contrast [default: 560; legal: 0 - 1000]
Contrast=350
# Set the initial brightness [default: 1000; legal: 0 - 1000]
Brightness=1000
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
# This value is used when the display is normally
# switched off in case LCDd is inactive
OffBrightness=0
# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
Speed=9600
# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
NewFirmware=no
# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
# normally you shouldn't need this
Reboot=no



## CrystalFontz633 driver (for CF633 only) ##
[CFontz633]

# Select the output device to use [default: /dev/lcd]
Device=/dev/ttyS0
# Select the LCD type (size) [default: 16x2]
Size=16x2
# Set the initial contrast [default: 560; legal: 0 - 1000]
Contrast=350
# Set the initial brightness [default: 1000; legal: 0 - 1000]
Brightness=1000
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
# This value is used when the display is normally
# switched off in case LCDd is inactive
OffBrightness=50
# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
Speed=19200
# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
#NewFirmware=no
# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
# I want to reboot the LCD to make sure we start from a known state
Reboot=yes



## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
[CFontzPacket]

# Select the LCD model [default: 633; legal: 631, 633, 635]
Model=635
# Select the output device to use [default: /dev/lcd]
Device=/dev/ttyUSB0
# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
Size=20x4
# Set the initial contrast [default: 560; legal: 0 - 1000]
Contrast=350
# Set the initial brightness [default: 1000; legal: 0 - 1000]
Brightness=1000
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
# This value is used when the display is normally
# switched off in case LCDd is inactive
OffBrightness=50
# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
Speed=115200
# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
#NewFirmware=no
# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
# I want to reboot the LCD to make sure we start from a known state
Reboot=yes



## Curses driver ##
[curses]

# color settings
# foreground color [default: blue]
Foreground=blue
# background color when "backlight" is off [default: cyan]
Background=cyan
# background color when "backlight" is on [default: red]
Backlight=red

# display size [default: 20x4]
Size=20x4

# What position (X,Y) to start the left top corner at...
# Default: (7,7)
TopLeftX=7
TopLeftY=7

# use ASC symbols for icons & bars [default: no; legal, yes, no]
UseACS=no



## Cwlinux driver ##
[CwLnx]

# Select the LCD model [default: 12232; legal: 12232, 1602]
Model=12232

# Select the output device to use [default: /dev/lcd]
Device=/dev/ttyUSB0

# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
Size=20x4

# Set the communication speed [default: 19200; legal: 9600, 19200]
Speed=19200

# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
# normally you shouldn't need this
Reboot=no

# If you have a keypad connected. Keypad layout is currently not
# configureable from the config file.
Keypad=yes

# If you have a non-standard keypad you can associate any keystrings to keys.
# There are 6 input keys in the CwLnx hardware that generate characters
# from 'A' to 'F'.
#
# The following is the built-in default mapping hardcoded in the driver.
# You can leave those unchanged if you have a standard keypad.
# You can change it if you want to report other keystrings or have a non
# standard keypad.
# KeyMap_A=Up
# KeyMap_B=Down
# KeyMap_C=Left
# KeyMap_D=Right
# KeyMap_E=Enter
# KeyMap_F=Escape

# keypad_test_mode permits to test keypad assignement
# Default value is no
#keypad_test_mode=yes



## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ##
[ea65]

# Device is fixed /dev/ttyS1
# Width and Height are fixed 9x1

# As the VFD is self luminescent we don't have a backlight
# But we can use the backlight functions to control the front LEDs
# Brightness 0 to 299 -> LEDs off
# Brightness 300 to 699 -> LEDs half bright
# Brightness 700 to 1000 -> LEDs full bright
Brightness=500
# OffBrightness is the the value used for the 'backlight off' state
OffBrightness=0



## EyeboxOne driver ##
[EyeboxOne]

# Select the output device to use [default: /dev/ttyS1]
#Device=/dev/cua01
Device=/dev/ttyS1

# Set the display size [default: 20x4]
Size=20x4

# Switch on the backlight? [default: yes]
Backlight=yes

# Switch on the cursor? [default: no]
Cursor=no

# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
Speed=19200

# Enter Key is a \r character, so it's hardcoded in the driver
LeftKey=D
RightKey=C
UpKey=A
DownKey=B
EscapeKey=P

# You can find out which key of your display sends which
# character by setting keypad_test_mode to yes and running
# LCDd. LCDd will output all characters it receives.
# Afterwards you can modify the settings above and set
# keypad_set_mode to no again.
keypad_test_mode=no



## g15 driver for Logitech G15 Keyboard LCDs ##
[g15]

# Display size (currently unused)
size=20x5

## glcdlib meta driver for graphical LCDs ##
[glcdlib]

## mandatory:

# which graphical display supported by graphlcd-base to use [default: image]
# (see /etc/graphlcd.conf for possible drivers)
Driver=noritake800

# no=use graphlcd bitmap fonts (they have only one size / font file)
# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
UseFT2=yes

# text resolution in fixed width characters [default: 16x4]
# (if it won't fit according to available physical pixel resolutioni
# and the minimum available font face size in pixels, then 
# 'DebugBorder' will automatically be turned on)
TextResolution=20x4

# path to font file to use
FontFile=/usr/share/fonts/corefonts/courbd.ttf

## these only apply if UseFT2=yes:

# character encoding to use
CharEncoding=iso8859-2

# minumum size in pixels in which fonts should be rendered
MinFontFaceSize=7x12

## optional:
Brightness=50                   # Brightness (in %) if applicable
Contrast=50                     # Contrast (in %) if applicable
Backlight=no                    # Backlight if applicable
UpsideDown=no                   # flip image upside down
Invert=no                       # invert light/dark pixels
ShowDebugFrame=no               # turns on/off 1 pixel thick debugging
                                # border whithin the usable text area,
                                # for setting up TextResolution and
                                # MinFontFaceSize (if using FT2);
ShowBigBorder=no                # border around the unused area
ShowThinBorder=yes              # border around the unused area
PixelShiftX=0
PixelShiftY=2



## Matrix Orbital GLK driver ##
[glk]

# select the serial device to use [default: /dev/lcd]
Device=/dev/lcd

# set the initial contrast value [default: 560; legal: 0 - 1000]
Contrast=560

# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
Speed=19200



## Hitachi HD44780 driver ##
[hd44780]
[menu]
MenuKey=Escape
EnterKey=Enter
DownKey=Down

[hd44780]
ConnectionType=lcd2usb
Contrast=850
Brightness=800
OffBrightness=0
Keypad=yes
Backlight=yes
Size=16x2
KeyDirect_1=Enter
KeyDirect_2=Down
KeyDirect_3=Escape

## ICP A106 driver ##
[icp_a106]
Device=/dev/ttyS1



## Code Mercenaries IO-Warrior driver ##
[IOWarrior]

# display dimensions
Size=20x4

# serial number [exactly as listed by usbview]
# (if not given, the 1st IOWarrior found gets used)
#SerialNumber=00000674

# Specifies if the last line is pixel addressable or it controls an
# underline effect. [default: true (= pixel addressable); legal: yes, no]
#Lastline=true



## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
[imon]

# select the device to use
Device=/dev/lcd0

# display dimensions
Size=16x2



## IrMan driver ##
[IrMan]
#if in trouble with IrMan, try Lirc emulator for IrMan

# Select the input device to use
#Device=/dev/irman

# Select the configuration file to use
#Config=/etc/irman.cfg



## Joystick driver ##
[joy]

# Select the input device to use [default: /dev/js0]
Device=/dev/js0

# set the axis map
Map_Axis1neg=Left
Map_Axis1pos=Right
Map_Axis2neg=Up
Map_Axis2pos=Down

# set the button map
Map_Button1=Enter
Map_Button2=Escape



## LB216 driver ##
[lb216]

# Select the output device to use [default: /dev/lcd]
Device=/dev/lcd

# Set the initial brightness [default: 255; legal: 0 - 255]
Brightness=255

# Set the communication speed [default: 9600; legal: 2400, 9600]
Speed=9600

# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
Reboot=no



## LCDM001 driver ##
[lcdm001]

Device=/dev/ttyS1

# keypad settings
# Keyname      Function
#              Normal context              Menu context
# -------      --------------              ------------
# PauseKey     Pause/Continue              Enter/select
# BackKey      Back(Go to previous screen) Up/Left
# ForwardKey   Forward(Go to next screen)  Down/Right
# MainMenuKey  Open main menu              Exit/Cancel
PauseKey=LeftKey
BackKey=UpKey
ForwardKey=DownKey
MainMenuKey=RightKey

# You can rearrange the settings here.
# If your device is broken, have a look at server/drivers/lcdm001.h



## HNE LCTerm driver ##
[lcterm]
Device=/dev/ttyS1
Size=16x2



## LIRC input driver ##
[lirc]

# Specify an alternative location of the lircrc file [default: ~/.lircrc]
#lircrc=/etc/lircrc.lcdproc

# Must be the same as in your lircrc
#prog=lcdd



##The driver for the VFD of the Medion MD8800 PC ##
[MD8800]
# device to use [default: /dev/ttyS1]
#Device=/dev/ttyS1

# display size [default: 16x2]
#Size=16x2

# Set the initial brightness [default: 1000; legal: 0 - 1000]
Brightness=1000
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
# This value is used when the display is normally
# switched off in case LCDd is inactive
OffBrightness=50



## MSI MS-6931 driver for displays in 1HU servers ##
[ms6931]

# device to use [default: /dev/ttyS1]
Device=/dev/ttyS1

# display size [default: 16x2]
#Size=16x2



## MTC-S16209x driver ##
[mtc_s16209x]

# Select the output device to use [default: /dev/lcd]
Device=/dev/lcd

# Set the initial brightness [default: 255; legal: 0 - 255]
Brightness=255

# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
Reboot=no



## Matrix Orbital driver ##
[MtxOrb]

# Select the output device to use [default: /dev/lcd]
Device=/dev/ttyS0

# Set the display size [default: 20x4]
Size=20x4

# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
Type=lkd

# Set the initial contrast [default: 480]
# NOTE: The driver will ignore this if the display
#       is a vfd or vkd as they don't have this feature
Contrast=480

# Set the initial brightness [default: 1000; legal: 0 - 1000]
Brightness=1000
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
# This value is used when the display is normally
# switched off in case LCDd is inactive
OffBrightness=0

# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
Speed=19200

# The following table translates from MtxOrb key letters to logical key names.
# By default no keys are mapped, meaning the keypad is not used at all.
#KeyMap_A=Left
#KeyMap_B=Right
#KeyMap_C=Up
#KeyMap_D=Down
#KeyMap_E=Enter
#KeyMap_F=Escape
# See the [menu] section for an explanation of the key mappings

# You can find out which key of your display sends which
# character by setting keypad_test_mode to yes and running
# LCDd. LCDd will output all characters it receives.
# Afterwards you can modify the settings above and set
# keypad_set_mode to no again.
keypad_test_mode=no



## Noritake VFD driver ##
[NoritakeVFD]
# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
Device=/dev/ttyS0

# Specifies the size of the LCD.
Size=20x4

# set the brightness
Brightness=255

# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
Speed=9600

# re-initialize VFD ?
#Reboot=yes



## Mini-box.com picoLCD (usblcd) driver ##
[picolcd]
# This is for the Mini-Box.com usblcd device that ships with the M300.  It can 
# also be purchased separately but this driver has only been tested on the M300 
# setup.

# KeyTimeout is the time that LCDd spends waiting for a key press before cycling 
# through other duties.  Higher values make LCDd use less CPU time and make 
# key presses more detectable.  Lower values make LCDd more responsive but a 
# little prone to missing key presses.  500 (.5 second) is the default and a
# balanced value.
KeyTimeout=500

# Contrast: [default: 1000; legal: 0 - 1000]
Contrast=1000

# Light the keys? i[default: on; legal: on, off]
Keylights=on

# If Keylights is on, the you can unlight specific keys below:
# Key0 is the directional pad.  Key1 - Key5 correspond to the F1 - F5 keys.  
# There is no LED for the +/- keys.  This is a handy way to indicate to users 
# which keys are disabled.  [default: on; legal: on, off]
Key0Light=on
Key1Light=on
Key2Light=on
Key3Light=on
Key4Light=on
Key5Light=on



## Pyramid LCD driver ##
[pyramid]

# device to connect to [default: /dev/lcd]
Device=/dev/ttyUSB0



## Seiko Epson 1330 driver ##
[sed1330]

# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
Port=0x378

# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002)
# Note: Currently only tested with G321D & SP14Q002.
Type=G321D

# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10]
CellSize=6x10

# Select what type of connection [legal: classic, bitshaker; default: classic]
ConnectionType=classic


## Seiko Epson 1520 driver ##
[sed1520]

# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
Port=0x378



## serial POS display driver ##
[serialPOS]

# Device to use in serial modea [default: /dev/lcd]
Device=/dev/lcd

# Specifies the size of the display in characters. [default: 16x2]
Size=16x2

# Set the communication protocol to use with the POS display.
# [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate]
Type=AEDEX

# communication baud rate with the display [default: 9600; legal: 1200, 2400, 19200, 115200]
Speed=9600



## Serial VFD driver ##
## Drives various (see below) serial 5x7dot VFD's.  ##
[serialVFD]

# Specifies the displaytype.[default: 0]
# 0 NEC (FIPC8367 based) VFDs.
# 1 KD Rev 2.1.
# 2 Noritake VFDs (*).
# 3 Futaba VFDs
# (* most should work, not testet yet.)
Type=0

# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
use_parallel=no

# Number of Custom-Characters [default: displaytype dependent]
#Custom-Characters=0

# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
Port=0x378

# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
Device=/dev/ttyS1

# Specifies the size of the VFD.
Size=20x2

# Set the initial brightness [default: 1000; legal: 0 - 1000]
# (4 steps 0-250, 251-500, 501-750, 751-1000)
Brightness=1000
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
# This value is used when the display is normally
# switched off in case LCDd is inactive
# (4 steps 0-250, 251-500, 501-750, 751-1000)
OffBrightness=0

# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
Speed=9600

# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
#ISO_8859_1=yes



## stv5730 driver ##
[stv5730]

# Port the device is connected to [default: 0x378]
Port=0x378



## SVGAlib driver ##
[svga]

# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
#Mode=G640x480x256

# set display size [default: 20x4]
Size=20x4

# Set the initial contrast [default: 500; legal: 0 - 1000]
# Can be set but does not change anything internally
Contrast=500

# Set the initial brightness [default: 1000; legal: 1 - 1000]
Brightness=1000

# Set the initial off-brightness [default: 500; legal: 1 - 1000]
# This value is used when the display is normally
# switched off in case LCDd is inactive
OffBrightness=500



## Text driver ##
[text]
# Set the display size [default: 20x4]
Size=20x4



## Toshiba T6963 driver ##
[t6963]

# set display size [default: 20x6]
Size=20x6

# port to use [default: 0x378; legal: 0x200 - 0x400]
Port=0x378

# Is ECP mode on? [default: yes; legal: yes, no]
#ECPlpt=yes

# Use graphics? [default: no; legal: yes, no]
#graphic=no



## Tyan Barebones LCD driver (GS10 & GS12 series) ##
[tyan]

# Select the output device to use [default: /dev/lcd]
Device=/dev/lcd

# Set the communication speed [default: 9600; legal: 4800, 9600]
Speed=9600

# set display size [default: 16x2]
Size=16x2



## ELV ula200 driver ##
[ula200]

# Select the LCD size [default: 20x4]
Size=20x4

# If you have a non standard keypad you can associate any keystrings to keys.
# There are 6 input key in the CwLnx hardware that generate characters
# from 'A' to 'F'.
#
# The following it the built-in default mapping hardcoded in the driver.
# You can leave those unchanged if you have a standard keypad.
# You can change it if you want to report other keystrings or have a non
# standard keypad.
# KeyMap_A=Up
# KeyMap_B=Down
# KeyMap_C=Left
# KeyMap_D=Right
# KeyMap_E=Enter
# KeyMap_F=Escape



## Wirz SLI LCD driver ##
[sli]

# Select the output device to use [default: /dev/lcd]
Device=/dev/lcd

# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
Speed=19200



## OnScreen Display using libxosd ##
[xosd]

# set display size [default: 20x4]
Size=20x4

# font to use, in XLFD format, as given by "xfontsel"
Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*

# EOF